How to Troubleshoot the Out of Paper Error on a Printer

Поиск  Правила 
Закрыть
Логин:
Пароль:
Забыли свой пароль?
Регистрация
Войти
 
Страницы: 1
How to Troubleshoot the Out of Paper Error on a Printer, While printing a little, do you come across a fault that indicates printer is out of paper or something likewise? It could be that the printer has run out of paper as the error suggests, but it can be a error if there is sufficient paper in the tray.
 
While printing a little, do you come across a fault that indicates printer is out of paper or something likewise? It could be that the printer has run out of paper as the error suggests, but it can be a error if there is sufficient paper in the tray. If it is the latter, you can use any of these below-given steps for trouble shooting printer issues. According to Tsgpc help how to troubleshoot the Out of paper error on a Printer.
Check the Paper and Reload it
First, check the paper's complaint loaded in the printer's tray. If the paper is damp, torn, or bent, you might have to replace it with fresh paper. Also, make sure that papers are of the exact distance and type. Now align the edges of the paper page by tapping that on an even shallow and place it back in the paper tray of the printer. The stack of paper should not include over a specific number of pages either.
Check the Back Panel Cover of the Printer
A panel at the hindmost of the printer might not be usual in place. Turn the device round and see to it if its back panel is not ajar. If it is not fully closed, there might be jammed paper there. If so, take off the back panel completely; clear the crumpled paper, and residence the panel spinal on the printer.
Reset the Printer
First, unplug the power cable immediately without powering off the printer. Then, pause for 30 seconds prior to working it back in the printer as well. In case the printer does not try on automatically, press on its manual control button.
Clean the Rollers of the Printer
If dirt has accrued in its rollers, it can lead to paper feed faults. Thus, clean it if obligatory; turn off the printer and unplug its power cable first. While cleaning the rollers, use a piece of lint-free cloth and fresh water. After you are done with cleaning the printer's rollers, permission to dry for a while before placing it back. After that, plug back the control cable and go on the printer.
Crosscheck if the Printer Spooler is running
The spooler facility manages print jobs on Windows. If the spooler remained not running, you would have to allow it for trouble shooting printer issues. Here is how to check the spooler shape.
· Press Windows and R keys to present the Run dialog box. In the dialog box, type facilities. MSc and press Enter.
· In the list of Facilities that opens next, scroll down to and discover the Print Spooler. Checkered if its Position is shown as Started. If it is Stopped, right-click on Print Spooler to open its Properties. In that, change the Service Status to how it must be by snapping on the Start button under the Overall
Страницы: 1
Читают тему